A robot lawn mower with artificial intelligence
The proven AIA technology
The Worx Landroid S300 is equipped with the patented AIA technology (short for Artifical Intelligence Algorithm). Thanks to this navigation technology, it is possible for the robot to drive skilfully through narrow passages or to cope with more complex surfaces without any problems. The robot mower also has multi-zone programming for optimum mowing of secondary areas. It mows reliably, efficiently and around 30 % faster than comparable models in its class.
Fully automatic lawn care
Equipped with a Li-ion battery and a brushless motor, the robot grass cutter works reliably. The Worx Landroid WR130E is designed for areas up to 300 m2 and is suitable for smaller areas, front gardens or even garden apartments. Slopes of maximum ± 27 % (15°) can be overcome.
Innovative: lateral charging contacts
On the Worx Landroid S300, the charging contacts are mounted sidewise. Therefore, the robot mower always moves forward in and out of the charging station. The station is designed so that the grass can grow through it. The base plate disappears into the grass carpet after a while.
Three blades cut the lawn precisely
On the underside of the device, the robot grass cutter has a blade disc with three rotating blades. This ensures that the grass is cut reliably and at every exit. The blades of the Worx Landroid WR130E rotate forwards and backwards. This means that the blades do not have to be changed as often. The cutting height of the Worx WR130E can be set between 30 and 50 mm. The cutting width is 18 cm.
Healthy lawn with its own mulch
The grass is shortened a little during each mowing operation. The cut grass particles fall to the ground, rot and serve as a natural fertiliser and moisturiser. This provides your lawn with natural fertilizer from your own garden, making it full, juicy and healthy.
Convenient app control for iOS and Android devices
The Worx Landroid S300 robot lawn mower can be conveniently controlled via an app using a smartphone or tablet. The app is available for free download for iOS and Android:
The Worx WR130E automatically updates its firmware via the WIFI connection. This ensures that the robot grass cutter is always up to date.
A robot mower with rain sensor
The built-in rain sensor causes the Worx Landroid S300 to interrupt its mowing operation during precipitation. It only resumes its mowing operation when the weather is dry. The sensitivity of the sensor can be changed via the app. If desired, the robot mower can also mow when it is raining. However, we do not recommend this as wet grass will stick to the blades and wheels and lead to more maintenance and cleaning work.
Optional accessories for your Worx S300
The lawn robot can be upgraded with various additional products. The Worx WR130E adapts perfectly to the needs of your garden. The following configuration options are available (at an extra charge):
Anti-collision system (ACS)
The Worx Landroid S300 uses ultrasonic sensors to detect obstacles and skilfully bypasses them without colliding with them.
The Worx Landroid WR130E robot lawn mower can be controlled with voice commands via loudspeakers, even if there is no Internet connection.
GPS localization via "Find my Landroid
If the robot grass cutter is stolen from your garden, the position of the Worx Landroid can be determined using 4G technology.
This is a virtual limitation option. It is especially useful for complex lawns and simplifies the laying of the boundary wire for Worx Landroid S300.
A safe and uncomplicated use in your garden
Safe mowing thanks to many sensors
The Worx S300 (WR130E) robot lawn mower is equipped with many sensors to ensure safe mowing. If the robot grass cutter is confronted with an obstacle, it automatically changes its direction of travel. Thanks to the built-in tilt and lift sensors, the blades stop immediately when the robot mower is raised or tilted. The robot lawn mower is protected by a PIN code to prevent unauthorised persons from using it.
Quick and easy installation
All important components for commissioning the Worx WR130E are included in the scope of delivery. The "Plug'n Play" motto of the robot lawn mower means that it comes pre-installed to your home and is ready for use at the touch of a button immediately after the boundary wire has been laid.
Important note for the warranty extension at myRobotcenter
To extend the manufacturer's guarantee to 3 years, you must register your Worx robot lawn mower online within 30 days of purchase. Otherwise you will only have a normal, 2-year manufacturer's guarantee on your robot grass cutter. Please note that the online registration must be done for the 5-year guarantee from myRobotcenter - if not, the costs for the 3rd year are not covered.
- Included in delivery
Included in delivery
Worx Landroid S300 (WR130E)
• Charging station
• Fixing nails (8 pcs.)
• Power supply (0.5 Amp)
• Boundary wire (100 m)
• Pegs (130 pcs.)
• Distance gauge (2 pcs.)
• Replacement blades plus screws (9 pcs.)
• Hexagon key
- Technical details
Manufacturer: Worx Model description: Worx Landroid S300 (WR130E) - 2020 model Recommended up to (approx.): 300 m² Dimensions (approx.): 50.7 x 36.1 x 20.5 cm Weight (approx.): 8.0 kg Programming/controlling the app: Yes Voice Service: Amazon Alexa Height of cut: 20 - 50 mm Cut width: 18 cm Incline: ± 27 % (15°) Mowing in the rain: optional (adjustable using rain sensor) Mowing settings: Three rotating blades Navigation: random IFTTT: No Charging time (approx.): 240 min. Rechargeable battery life (approx.): 60 min. Guarantee on the product: 5 years Guarantee on the rechargeable battery: 1 year Type of rechargeable battery: Lithium-ion (20 V/ 2.0 Ah) Boundary: Boundary wire Volume (approx.): 65 dB Safety: Obstacle detection, lift and tilt sensors, PIN code, alarm function Special features:
• Artificial intelligence (AIA technology)
• Lateral charging contacts and an innovate charging station
• Multi-zone programming
• Different additional functions optionally available
- Payment and delivery
Payment and delivery
Orders totalling over 100 GPB are delivered free of charge within United Kingdom. Orders totalling less than this are charged at 10 GBP per delivery.
Deliveries in United Kingdom will be made by DHL / Royal Mail or a haulage firm (from 31.5 kg) within 3 to 5 working days after the order is placed.
DHL Express delivery option
During the checkout process, you will have the opportunity to select DHL Express. Orders which are placed untill 12.00 p.m. and are in stock, will be shipped on the same day. The additional fee depends on your delivery address and cart.
myRobotcenter offers a number of payment methods.
Do you have any questions about the various payment methods? Our customer service team will be happy to advise you; Please use our contact form.
- Product Questions
Product QuestionsDo you have a new question about the product for which you can’t find the answer here? Please submit your question here; we will answer as soon as possible.
A few days after your order you will receive an email through which you can submit your personal review.